7
Assembly
7.1
Preparation
–
Do not modify the screws and threaded pins.
Exception: if immediate modification is required based on these operating instructions.
–
Select the motor and motor mounting kit from the Festo catalogue
è
When using other motors: observe the critical limits for forces, torques and speeds
è
–
When mounting the motor: follow the assembly instructions for the motor mounting kit.
–
Connect motor cables only after the mini slide is mounted.
Fig. 4
NOTICE!
The reference position is lost when the motor is dismounted (e.g., when turning the motor around).
•
Start homing
è
CAUTION!
With vertical or diagonal mounting position:
When power is off, the slide can travel or fall uncontrolled into the lower end position. Injury due to
impacts or crushing.
•
Bring moving parts of the product into a safe end position or secure them against falling.
–
Place the product in such a way that the operating elements can be reached.
–
Install product without tension or distortion.
–
Fasten product to a mounting surface with flatness of 0.05% of the stroke length, but max.
0.5mm.
For gantry applications, attention must also be paid to parallel alignment or product height when
aligning the axes.
For additional information, contact your local Festo Service.
Assembly
7
Festo — EGSC-BS-KF — 2018-11c
