Festo EduTrainer 567321, Руководство по эксплуатации

Страница: 24 / 52

3 Selecting and adjusting functions
24
© Festo Didactic 758286
DC-Output 0.0 V
DDS Waveform
Waveform
Frequency 10.0 kHz
Amplitude 0.0 V
Offset 0.0 V
> (1/3)
>
U
1
0.0 V
U
2
0.0 V
(U1, U2) I1, I2
U1, I1 U2, I2
(2/3)
Navigating to the next menu – here’s how
If, for example, you want to navigate from the main menu to the “Measurements” menu:
1.
Select
Set the arrow to the last line “(1/5)” by turning the rotary knob.
2. Acknowledge
Acknowledge your selection by pressing the rotary knob.
The word “Measurements” appears briefly at the display, and the new menu is opened.
Note
Changing from one menu to the next is only possible in an endless loop in ascending order from 1 to 3.
Either 2 or 3 pages are displayed, depending on the equipment level of the power supply unit.
Power supply units with part numbers 576624 and 571810 are not equipped with a measuring interface.
The measurement display does not appear in this case.
The power supply unit with part number 567321 is shipped with a measuring interface.
The concept of selection and acknowledgement, followed by adjustment and acknowledgement, is the same
in this menu. Try it now. Change a setting in the new menu and then navigate to the next menu.