Festo DGE ZR RF Series, Инструкции по ремонту

Страница: 9 / 64

9 / 44 Festo 7DGE_ZR_RFb_en
Item Designation Type Note
1 Flange screw M5×58 Tightening torque 5.9 Nm, use LOCTITE 243
2 Sealing cap
3 Sealing disc
4 Retaining ring DIN 472-37×1.5
5 Drive cover
6 - 8 Toothed drive shafts With pressed-on deep-groove ball bearings
9 Spring pin DIN 7346-4.5×14
10 - 11 Toothed belt
12 Threaded pin DIN 913-M5×6-45H Tightening torque 0.5 Nm
13 Clamping plate
14 Socket head screw DIN 912-M5×25-10.9
15 Lubrication nipple
16 Clamping body
17 Retaining ring DIN 471-25×1.2 Only installed with size 63
18 Centring screw Tightening torque 9.9 Nm, use LOCTITE 243
19 Eccentric screw Adjustment torque 0.5 Nm, use LOCTITE 243
20 Set of wiper seals Impregnated with oil
21 Track roller
22 Fitting washer
23 Buffer
24 Slide module
25 Slide
26 Washer DIN 125-A-6.4-A2
27 Hex nut DIN 439 B-M6 Tightening torque 2.9 Nm, use LOCTITE 243
28 Cover cap
29 Cylinder barrel Aluminium profile with roller-swaged guide rods
(surface-hardened)
30 Cover cap
31 Cover cap
32 Socket head screw DIN 912-M4×40-8.8 Tightening torque 2.9 Nm
33 Sealing cap
34 Coupling housing
35 Centring ring
36 Coupling housing module See operating instructions for assembly
37 Coupling module See operating instructions for assembly
38 Socket head screw DIN 912-M4×12-8.8 Tightening torque 2.9 Nm
39 Coupling