Festo DGE ZR RF Series, Инструкции по ремонту

Страница: 39 / 64

39 / 44 Festo 7DGE_ZR_RFb_en
6 Tools
This chapter provides an overview of the tools and aids required to repair and maintain the toothed belt axis.
6.1 Standard tools
The following standard tools are required to repair and maintain the toothed belt axis:
Designation Additional information
Plastic hammer –
Screwdriver bits With ¼" square drive, for 3, 4 and 6 mm socket head screws, length of the hexagon
min. 30 mm (long version)
Pliers for retaining rings
(interior protection for hole) 19 – 100 mm
Pliers for retaining rings
(exterior protection for pin) 20 – 30 mm
Ruler –
Internal hexagon screwdriver
(Allen key) 2 – 10 mm
Torque wrench 1 – 80 Nm
Torque wrench with dial gauge
and/or drag indicator With ¼" square drive, 50 – 600 Ncm
Tensile and pressure force
measuring device Electronic hand-held force measuring device, measuring range: 0 – 50 N
Screwdriver bits Internal hexagon socket (Allen socket): 2 – 10 mm
Flat pliers –
Sturdy general purpose scis-
sors or metal shears For cutting the toothed belt to length
6.2 Special tools
The following special tools are required to repair and maintain the toothed belt axis:
Designation Additional
information Festo order no. Photo
One-hand high-pressure
grease gun Pinpoint nozzle for
miniature funnel-type
lubrication nipple 647 958
1)
1)
See “Assembly aids” in the online spare parts catalogue on the Festo website ( www.Festo.com ).