Festo DGE ZR RF Series, Инструкции по ремонту

Страница: 29 / 64

29 / 44 Festo 7DGE_ZR_RFb_en
• Push the slide out of the axis.
Note (DGE-63 only)
The wiper seals are secured with a retaining ring so they cannot fall down-
wards.
DGE-63 only
• Remove the retaining rings from the outer track rollers.
All sizes
• Remove the two wiper seals from the outer track rollers.
• Lever both covers out of the slide.
• Loosen the two hex nuts and unscrew them.
Note
You may need to hold the eccentric screw from underneath. Alternatively you
can use an Allen socket and a socket with milled spanner flat (see section
6.1 “Standard tools” and section 6.4 “Devices for in-house assembly” ).
• Remove the flat washers from the hole.