Festo DGE ZR RF Series, Инструкции по ремонту

Страница: 24 / 64

24 / 44 Festo 7DGE_ZR_RFb_en
• Loosen the threaded pins in the clamping bodies at both ends of the
toothed belt and unscrew them.
Note
Pay attention to the clamping plate in the clamping body as it could fall out.
• Pull the clamping bodies sideways from the toothed belt.
• Remove the clamping plates from the toothed belt.
• If the toothed belt is to be replaced, pull it carefully out of the axis.
• Loosen the socket head screws in the drive cover and unscrew them.
• Pull the drive cover away from the cylinder barrel.
Note
The drive covers are connected to the cylinder barrel using spring pins.
A certain amount of force is required to pull them away.