Festo CPX-FB38, Электронное руководство

Страница: 77 / 120

2. Commissioning
2−41
Festo P.BE−CPX−FB38−EN en 0804NH
2.5 Parameterisation
2.5.1 Introduction to parameterisation
The system reaction of a CPX terminal can be largely adapted
to the relevant application. You can individually set the reac
tion of the entire terminal as well as of individual modules
and channels through parameterisation. A distinction is made
between the followingparameterisation functions:
System parameterisation, e.g. switching off fault
messages, setting reaction times
Module parameterisation (module− and channel−specific),
e.g. monitoring functions, settings for error handling,
settings for forcing
Parameterising the diagnostics memory.
A detailed description of the individual parameters as well as
basic information on application can be found in the CPX
system manual (P.BE−CPX−SYS−...).
Which parameters are available for the used modules are
explained in the manual for the respective module, e.g.
manual for CPX I/O modules (P.BE−CPX−EA−...). An example of
application can be found in section 2.7.
Please note
The CPX terminal is supplied with factory−preset
parameters (default parameterisation).
Please note
Please observe the specific notes on parameterising the
bus node CPX−FB38 in section 2.5.3.