Festo CPX-AP-I-PB-M12, Инструкции и эксплуатация

Страница: 23 / 30

10.4.3 Identifier-related diagnostics
One bit is reserved for every module (identifier byte) assigned during configuration. A set bit means
that a diagnostic message exists in this I/O area.
Bit Byte Contents
7 6 5 4 3 2 1 0
Header byte
Length of the module-related diagnostic
block including the header byte (9 bytes) 0 0 1 0 0 0 25
Bit 7 and bit 6 are permanently assigned 0 1
Pending diagnostics at
Module 0 1
Module 1 1
Module 2 1
Module 3 1
Module 4 1
Module 5 1
Module 6 1
26
Module 7 1
… … …
Module 48 1
Module 49 1
Module 50 1
Module 51 1
Module 52 1
Module 53 1
Module 54 1
32
Module 55 1
Tab. 26 Identifier-related diagnostics
Diagnostics and fault clearance
23 Festo — CPX-AP-I-PB-M12 — 2020-03