Festo CPX-2AA-U-I, Электронное руководство

Страница: 62 / 228

2. Analogue input module CPX−2AE−U−I
2−18
Festo P.BE−CPX−AX−EN en 0503b
2.4.3 Parameters of the analogue input module type CPX−2AE−U−I
The tables below give an overview of the module parameters
of the analogue input modules.
F uncti o n num b e r
1)
M od u l e p a r amete r s
4828 + m * 64 + 0 Monitoring the CPX module
4828 + m * 64 + 1 Behaviour after short circuit/overload
4828 + m * 64 + 2 Reserved
4828 + m * 64 + 3 Input analogue−value data format
1)
m = module number (counting from left to right, beginning with 0)
Tab.2/8: Overview module parameters
F uncti o n num b e r
1)
C h anne l− s p eci f ic m od u l e p a r amete r s
4828 + m * 64 + 6/7 Monitoring channel 0, 1
4828 + m * 64 + 8 Signal range channel 0, 1
4828 + m * 64 + 9 Filter measured value channel 0, 1
4828 + m * 64 + 10/11 Lower limit channel 0
4828 + m * 64 + 12/13 Lower limit channel 1
4828 + m * 64 + 1 4/15 Upper limit channel 0
4828 + m * 64 + 16/17 Upper limit channel 1
2)
Force channel x (see also CPX system manual)
1)
m = module number (counting from left to right, beginning with 0)
2)
Access is protocol−specific (see manual for field bus node)
Tab.2/9: Overview channel−specific module parameters