Festo CPA-SC Series, Руководство пользователя

Страница: 15 / 140

Contents and general instructions
XIII
Festo P.BE−CPASC−EN en 0808c
Index of abbreviations
The following product−specific terms and abbreviations are
used in this manual:
Term Meaning
Base block Sub−base:
Base for sub−base valves and blanking plates
With ports for supply air (1), (12/14) and exhaust air (3), (5), (82/84)
With work connections (2), (4)
With pressure compensation hole (L)
PRS manifold:
Base for semi−inline valves and blanking plates
With ports for supply air (1), (12/14) and exhaust air (3), (5), (82/84)
Without work connections
With pressure compensation hole (L)
Blanking plate Plate without valve function, for reserving valve locations.
Components Common term for base block, valve sub−bases and blanking plates
Connecting the
tubing Connecting the supply lines (tubing) to the CPA−SC
CP
C
ompact
P
erformance
DI connection Variants of the CPA−SC valve terminal with field bus direct connection
DeviceNet"
FL connection CPA−SC valve terminal variant with 26−pin multipin plug strip for ribbon
cables as per DIN EN 60603−13. All valve solenoid coils are connected
centrally via this plug strip.
HC connection CPA−SC variant on which each valve sub−base has a horizontal connection.
Each valve is connected electrically with a special cable via this connection.
Ident. code (I.C.) I dentification c ode. This is usually printed on the relevant component.
The component can be identified with this code (see Tab.1/12).
Manual override Manual override
MP connection CPA−SC valve terminal variant with 25−pin multipin sub−D connection.
All valve solenoid coils are connected centrally via this connection.