manualshive.com logo in svg

Festo CMMO-ST-C5-1-DION, Оригинальное руководство пользователя

Поделиться
Скачать
Festo CMMO-ST-C5-1-DION Скачать руководство пользователя страница 23

2

Product description

Festo – GDCP-CMMO-ST-EA-SY-EN – 2017-05c – English

23

2.3.3

Password protection

Password protection protects the controller from unauthorised or accidental changes to the paramet­

erisation and prevents controlling access to the actuator via FCT or web server.

Password query

FCT

The password is queried when establishing the online connection between FCT and

motor controller. Following input of the correct password, all functions are released

until the software is shut down.

Web browser

The query is made when changing from the “Diagnosis” web page to the

“Parameters” web page. In the input dialogue “Authentication required”, the “User

name” box can remain empty. This is not evaluated. Following input of the correct

password, all functions are released until the web browser is shut down.

Tab. 2.11 Password query

The web server does not support an HTTPS connection. The password is transferred

insecurely. The web browser notes the entered password even after the tab card has

closed on the web server, until the web browser is closed. Before the web browser is

closed, the cache (buffer memory) needs to be deleted as a precaution(with Microsoft

Internet Explorer menu [Options], command “Delete browser”)

Enabling password protection

In delivery condition, password protection is enabled. To enable, a password is defined in the FCT 

(

è

 Chapter 5.4.6) 

or

 via the web browser (

è

 Chapter 5.3.6). After input of a valid password, the pass­

word protection becomes effective simultaneously for FCT 

and

 for the web browser.

Firmware version

. 

V1.1.2.4:

The password is saved in the parameter file of the controller.

By downloading another parameter file to the controller, the password can be changed or

lost.

Firmware version 

 

V1.1.2.4:

The password is saved permanently and is not changed by the download of a parameter

file. To establish the compatibility with older firmware versions, the password continues

to be saved in the parameter file. To create a compatible parameter file:

 Save the parameter file after enabling the password.

Changing/deleting the password

To change or delete, the active password must be known. Changing involves the input of a new pass­

word. Deletion involves the use of a blank input field

Password forgotten?

If the password has been forgotten, it can be reset using Festo Service.

Содержание CMMO-ST-C5-1-DION















































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды