Festo 8121048, Руководство по эксплуатации

Страница: 51 / 160

Servo brake and drive system
© Festo Didactic 8121048
51
5 Work and safety instructions
5.1 General information
CAUTION
•
Trainees should work with the components and systems only under the
supervision of an instructor.
•
Observe specifications included in the technical data for the individual
components, and in particular all safety instructions!
•
Wear your personal protective equipment (safety shoes) when working on the
circuits.
NOTE
Radio interference
This class-A device is intended for industrial environments. The device may cause radio
interference in other environments.
Avoid operating this device at the same time as sensitive devices.
5.2 Mechanical system
WARNING
• Switch off the power supply!
– Switch off both the operating power and the control power before working on
the circuit.
– Only reach into the setup when it is at a complete standstill.
– Be aware of potential overtravel times for the actuators.
WARNING
Rotating axis
Danger of hair or jewelry being pulled in
• Check the safety device each time before operation
•
Do not reach under the protective cover during operation
• Remove any jewelry
•
Wear a hair net if necessary