Festo 8024918, Инструкции по ремонту

Страница: 6 / 54

6 / 54 Festo 7ELGA-BS-KFa_en
1 Important information
1.1 About these repair instructions
This document contains important information about professional repair of the spindle axis type ELGA-BS-KF.
However, the costs of carrying out a repair must be considered in the case of larger defects.
Before carrying out a repair, the relevant chapter in these instructions must be read in full and followed consistently.
For reasons of clarity, these repair instructions do not contain all detailed information. The following documents should
therefore also be available when repairing the spindle axis:
– Operating instructions
Contains information about the installation and removal of the motor, motor flange, coupling and coupling housing of
the ELGA-BS-KF spindle axis and its function, structure, use, installation, commissioning, maintenance and care, etc.
It can be found on the Festo website (

www.festo.com ).
– Spare parts documentation
Contains an overview of the spare and wearing parts as well as information on their installation. This can be found in
the online spare parts catalogue on the Festo website (

www.festo.com/spareparts ).
– Information brochure – accessories, equipment and tools
Contains an overview of the available installation resources, e.g. lubricating greases, threadlocking agents,
maintenance tools, etc. (resources for installation and maintenance). The brochure can be found in the online spare
parts catalogue on the Festo website (
 http://spareparts.festo.com/xdki/data/SPC/0/PDF_SAFE/Fitting%20
aids.pdf ).
1.2 Symbols used in these repair instructions
Danger categories
The following symbols identify text passages which draw attention to specific hazards.
Danger
Warning
Caution
Marking special information
The following symbols identify text passages which contain special information.
Note
Information
Environment