Festo 8024918, Инструкции по ремонту

Страница: 10 / 54

10 / 54 Festo 7ELGA-BS-KFa_en
2.3 Slide variants and orientation definition
This illustration gives you an overview of the mounting designations of the spindle axis.
Lubrication nipple = reference point
(The side with the lubrication nipples
on the slide module is defined as the
front).
O = top
U = bottom
R = right
L = left
V = front
H = rear
2.4 Type code
The precise features of a toothed belt axis can be determined with the help of the product labelling on the toothed belt
axis. The order code describes the features of the toothed belt axis, separated by a hyphen “-”.
Example:
ELGA-BS-KF-80-500-30H-20P-ML-M1-F
8024919 HD13
ABCDEFG12345
5
4
1
2
3
1
Order code
2
Part number
3
Serial number
4
Product Key
5
Product Key Code
Data Matrix Barcode
(http://pk.festo.com/ + Product Key)
The order code on the product labelling provides the following information:
ELGA ELGA type spindle axis
BS Ball screw
KF Recirculating ball bearing guide
80 Size
500 Stroke [mm]
30H Stroke reserve [mm]
20P
Spindle pitch, 20 mm / spindle rotation
ML Motor attachment position, left-hand side
M1
Incremental displacement encoder, resolution 2.5 μm
F Displacement encoder attachment position, front