Festo CPX-CMXX 1102b English
19
Dismantling
1. Loosen the 4 screws
1
of the CPX-CMXX
2
with a
TORX screwdriver size T10.
2. Pull the CPX-CMXX
2
carefully and without tilting
away from the contact rails
3
of the manifold sub-
base
4
.
Assembly
1. Place the CPX-CMXX
2
in the manifold sub-base
4
.
Make sure that the grooves with the terminals for
electrical contact on the bottom of the CPX-CMXX
2
lie directly above the contact rails
3
.
2. Then press the CPX-CMXX
2
carefully and without
tilting as far as possible into the manifold sub-base
4
.
3. Place the screws
1
so that the self-cutting threads
can be used. Tighten the screws
1
at first only by
hand.
4. Tighten the screws
1
with a TORX screwdriver size
T10 with 0.9 … 1.1 Nm.
