Festo CPX-CMXX 1102b English
18
2
Installation instructions
Warning
Before carrying out installation and maintenance work,
switch off the following:
– if applicable, the compressed air supply
– the operating voltage supply for the electronics/
sensors
– the load voltage supply for the outputs/valves.
2.1 Installation/dismantling
The multi-axis interface CPX-CMXX is mounted in a
manifold sub-base of the CPX terminal.
1
Screws, TORX T10
tightening torque
0.9 … 1.1 Nm
2
CPX-CMXX
3
Contact rails
4
Manifold sub-base
(as desired, here as
an example without
supply)
3
1
2
4
