Festo 548076 Скачать руководство пользователя

Страница: 58 / 92

58 / 92

Festo 7DHTGd_en

4.4

Dismantling the rotary indexing table

The DHTG-…-A rotary indexing table is made up of the following function groups:
–  Plate with index plate.
–  Pinion and gear racks with shock absorber for rotation.
–  Bolts for locking.

4.4.1

Removing the plate

1. Place the rotary indexing table on the work surface with the plate facing

upwards.

Loosen flat head screw in the plate and unscrew it.

DHTG-65 and DHTG-90 only

Mark the position of the clamping ring in relation to the screw hole of the flat

head screw on the plate.

Remove the clamping ring using two pin punches and a hole profile (or

another suitable lever tool).

To loosen the clamping ring, the rotary indexing table must be held in place

(if necessary, with the help of a second person or by fixing the rotary index

ing table).

4. Check the plate seal on the clamping ring for wear and replace it as follows

if necessary:

5. Pull the plate seal off the clamping ring.

6. Pull the guide rail of the guide segments off the clamping ring.

Содержание 548076





























































































Результаты поиска

Содержание 548076

Отзывы:

Похожие инструкции для 548076

Бренды по названию

Популярные бренды

Festo 548076, Инструкции по ремонту

Результаты поиска

Содержание 548076

Отзывы:

Похожие инструкции для 548076

Бренды по названию

Популярные бренды