10 / 55
Festo 7DFPIb_en
Example 2:
DFPI-100-125-ND2P-E-P-G2
551380 A308 Rev 02
1
4
2
3
1
Type code
2
Test number
3
Serial number
4
Part number
The type code on these rating plates provides the following information:
DFPI
Linear actuator of the type DFPI
100
Diameter of the installed piston
125
Stroke 125 mm
N
No cushioning
D2
Analogue displacement encoder
P-
Displacement measurement via potentiometer
C1
Control via controller 1
V
Integrated directional control valve
-P-
Protected connection type
A
Analogue feedback signal
-E-
External controller attachment position (no specification indicates internal attachment position)
G2
Second generation
-E
Retracted piston safety position (no specification indicates advanced safety position)
A list and description of all the equipment features available for the linear actuator can be found in the data sheet,
which is available on the Festo website (
).
2.5
Production series
The linear actuator type DFPI-…-ND2P is built with 2 different controllers. The repair steps differ depending on the
controller, and are described separately for each controller in these repair instructions.
See section
4.5 „Repair steps for the end cap module“
See section
4.7 „Repair steps for the end cap module“
.
