fesing SSIF2P15S48100C, Руководство по применению

Страница: 17 / 56

As shown in Figure 5-4, when monitoring the battery by the computer, connect the
‘USB convert to
RS485
’ communication line between battery and computer.
Figure 5-4: Communication Cable Connections between Battery and Computer
5.2 Connect Cables of the Multiple Batteries in Parallel
When multiple batteries in parallel, the cable connecting procedures are follows.
1. As shown in Figure 5-5, following the cable connection method of the single battery, connect the
positive and negative cables between the Battery 1 and the busbar, Battery 2 and the busbar, and
Battery N and the busbar respectively.
Note: To ensure the current balance, please use cables with the same diameter and length for each
battery.
Figure 5-5: Multiple Batteries Connections