FES-DIS-M100 MOTOR manual Version 1.2
November 2016
Page 9 of 12
7. Removal of motor
Removal of motor from sailplane is only allowed in case of
written permission
from manufacturer otherwise warranty is not valid any more!
Warning!
It is not allowed to fly with removed motor from the sailplane, as C.G. position
change significantly!
On back side of mounting wall are visible four M8 nuts tightened over big
spacer and rubber silen blocks. Please leave them at they are. Proper way of
removing motor is to follow next steps.
To remove the motor from the glider
(complete with spinner and propeller)
1.
Open ventilation (knob fully forward position)
2. Unscrew 6 M4 inbus bolts and remove composite cover from center of front motor
mounting rib (from cockpit side)