Ferroli Napoli 1000, Инструкции по использованию и установке

Страница: 55 / 64

55
A73023140 EN
N A P O L I
5.3.5.6 Language
This menu is used to set the display language on the screens:
• SPANISH
• ENGLISH
Select the preferred language with the
p
and
q
keys, and confirm with
OK
.
5.3.5.7 Reset default
This menu is used to reset the emitter back to the default factory settings:
• Comfort set point is 20 °C,
• Economy set point is 16.5 °C,
• Program is set to Economy for all half-hour sections of all days,
• The day is set to Monday,
• The time is set to 00:00,
• Brightness level at rest is set to 1,
• Maximum brightness Time is set to 10 seconds,
• Open Windows and Adaptive start control are disabled,
• The language is set to Spanish,
• The emitter returns to Standby mode.
5.4 Heating and temperature display
When the room temperature is below the temperature set point, the emitter will turn the element
on to raise the room temperature. To show the user that the emitter is heating there is a symbol of
a thermometer being filled in the top right hand corner.
The room temperature is normally shown on the display; the set point temperature is only
displayed when the user attemps to change it; after the setting has been adjusted the display will
revert back to the room temperature.
The comfort and eco set point tem-
peratures can be modified both from
Comfort and Economy modes. The
comfort and eco set points can be also
changed within Program mode if they
are active at the time (the anti-frost
set point can never be modified).