ferroamp EnergyHub XL Single 21 kW, Руководство по установке

Страница: 14 / 20

12
2 Installation
The installation section will take you step by step through the
process of installing a EnergyHub XL Single.
NOTE! Ferroamp does not take responsibility for damages on the
product caused by incorrect or careless installation.
NOTE! We recommend that you use end terminals for all
connection points that have multi-threaded conductors.
2.1 Required tools
•
Screwdrivers:
o
TX - 30
o
TX – 20
o
Slot drive 1x5 mm
•
Cable peeler and cutter (1 – 10 mm²)
2.2 Placement
NOTE! Ferroamp does not take responsibility for installations
where the following stated criteria are not met.
Make sure that the chosen location for installation is in line with
the following criteria:
•
Indoor environment protected from rain and direct
sunlight.
•
Space is well ventilated (if the EnergyHub XL Single is
placed in a sealed area then forced ventilation must be
provided to ensure adequate heat dissipation)
•
Ambient temperatures must not fall below 0 ° C and not
exceed 45 ° C
•
The environment must be non-condensing, relative
humidity below 95%
•
There must be at least 50 mm free space underneath the
cabinet to have sufficient cooling.
•
Have free space around the cabinet according to the
following figures:
• Do not work alone. In an emergency, someone
else's presence may be necessary!
• The electrical installation must comply with
national / local laws and regulations,
appropriate
standards and applicable
requirements from recognized organizations.
• The electrical installation must be carried out
by a qualified installer and in accordance with
the applicable electrical standard.
• Ensure that the location of the
EnergyHub XL
Single
never is an obstacle to an emergency
evacuation path. In accordance with national &
local laws.