Not for
Reproduction
Left Hand Side Lockout Bolt Adjustment
1.
Observe the left hand side lockout bolt (A, Figure 47). It
should be positioned so that it is in the center of the notch
of the lockout plate (B) on the ground speed control lever.
47
2.
To adjust the position of the left hand side lockout bolt in
the notch of the lockout plate on the ground speed control
lever, loosen the jam nut (A, Figure 48) tightened against
the upper ball joint (B) on the left hand side motion control
rod (C) and turn the rod until the left hand side lockout bolt
is in the center of the notch of the lockout plate.
48
3.
Re-tighten the jam nut.
Ground Speed Control Lever Alignment
Adjustment
1.
Observe the alignment of the right side ground speed control
lever (A, Figure 49) as compared to the left side ground
speed control lever (B).
49
2.
If the ground speed control levers are not aligned, loosen
the right side lockout bolt (A, Figure 50) so that it can slide
back and forth in the slot of the neutral lockout shaft (B).
50
3.
Loosen the jam nut (A, Figure 48) on the right side motion
control rod (D) and turn the linkage rod until the two handles
align.
4.
Tighten the jam nut.
5.
Drive the unit outside to a flat, level area with plenty of room
to maneuver.
6.
Safely drive the unit with the ground speeds in the maximum
forward position.
7.
If the unit travels straight, tracking is adjusted correctly,
proceed to
Right Side Lockout Bolt Adjustment.
8.
If the unit veers to the left or the right, the tracking must be
adjusted.
35
Содержание 5901465
Страница 1: ...N o t f o r R e p r o d u c t i o n...
Страница 46: ...N o t f o r R e p r o d u c t i o n Notes...
Страница 47: ...N o t f o r R e p r o d u c t i o n Notes...
Страница 48: ...N o t f o r R e p r o d u c t i o n...
