Ferris 5901465, Руководство оператора

Страница: 26 / 48

Not for
Reproduction
26
7. Remove the oil drain hose from it's storage location.
8. Remove the cap from the drain spout of the oil drain valve.
9. To operate the oil drain valve, turn counter-clockwise to
open and drain the engine oil into a suitable container.
10. After the engine oil has drained, turn the oil drain valve
clockwise to close and re-install the cap on the oil drain
valve. Re-install the oil drain hose into it's storage location.
11. Pour oil into the engine oil fill (F, Figure 25). The remote oil
tank is designed to hold 5 qt (4,73 L) of engine oil.
12. Install the engine oil dipstick (A, Figure 27) into the tank by
pressing down firmly with your hand. The engine oil dipstick
has a detent (B) and it must snap into place on the lip (C)
of the tank housing so that the dipstick is fully installed into
the tank. This action requires moderate force.
27
13. Remove the engine oil dipstick and check the oil level.
Maximum oil level is the "FULL" line (G, Figure 25) on the
dipstick. If the oil level is at or below the "ADD 1 QT." line
(H), add more oil.
14. Re-install the dipstick.
15. Install a new engine oil filter by lowering it into the engine
oil fill and then turning clockwise a 1/4 turn (I).
16. Close the oil fill cover.
17. Start and run the engine. As the engine warms up, check
for oil leaks.
18. Stop the engine and check oil level. Add more if necessary.
19. If desired, a new self-locking tie can be installed to keep
the oil fill cover securely closed.
Changing the Engine Oil and Filter (All
Other Models)
This series of mower is equipped with different engine options:
Briggs & Stratton EFI Series engine (A, Figure 28), Kawasaki
FX Series (B), and Kawasaki FX Fuel Injected Series (C). Please
reference figure 28 for the location of the components listed in
this procedure.
26 ferrismowers.com