Ferno Transcend Chair Series Скачать руководство пользователя страница 30

Страница: 30 / 44

7 - MAINTENANCE

Maintenance

WARNING

Improper maintenance can cause injury. Maintain the

chair only as described in this manual.
Lubricating the track system can result in injury to patient

and/or operators. Never lubricate the tracks or belts.

7.2 Disinfecting/Cleaning Restraints

Ankle Restraint:

Place buckled restraint in a mesh bag and launder in

a washing machine using warm water, a disinfectant soap, and gentle

agitation. Hang the restraint to dry. Do not put it in a dryer.

Chest and Lap Restraints:

Disinfect and clean restraints as directed in

the restraint users’ manual provided. Additional, free users’ manuals can

be obtained from Ferno Customer Relations (page 2).

7.3 Disinfecting/Cleaning the Chair

To disinfect:

Remove restraints and wipe all surfaces of the chair

and panels with disinfectant. Follow the disinfectant manufacturer’s

directions for application method and contact time.

To clean:

Wash panels and all parts of the chair with warm water and

a mild detergent. Rinse with clean water. Dry with a towel or allow to

air-dry.

7.4 Cleaning Tracks and Belts

To ensure predictable belt performance, it is important to keep the track

and belts free of oil, grease, dirt, and debris.

1. Hold the belts away from the track frame and remove any debris.
2. Clean both sides of the track frame, and both belts, with SD-20

™

All-Purpose Cleaner

and a clean cloth. Follow instructions on the

container.

3. Dry track and belts thoroughly.

To order SD-20

™

Cleaner in North America, contact the Spartan

Chemical Company, Maumee, Ohio, USA at 1.800.537.8990 or visit www.

spartanchemical.com on the internet.

7.1 Maintenance Schedule

The chair requires regular maintenance. Set up and follow a

maintenance schedule. The table at right represents minimum intervals

for maintenance.
Keep maintenance records. A sample maintenance record sheet is

provided on page 42.
When using maintenance products, follow the manufacturers’ directions

and read the manufacturers’ material safety data sheets.

NOTICE

Disinfectants and cleaners containing bleach, phenolics, or

iodines can cause damage. Use caution when disinfecting

and cleaning with products containing these chemicals.
Using abrasive cleaning compounds or applicators on the

chair can cause damage. Do not use abrasive materials to

clean the chair or PowerTraxx.

DO NOT PRESSURE WASH

Water under high pressure, or steam, can

penetrate joints, flush away lubricant, and

cause corrosion. Do not pressure wash the

chair or PowerTraxx.

Minimum

Maintenance

Each Use

As Needed

Monthly

Disinfecting

(this page)

•

Cleaning

(this page)

•

Inspection

(page 32)

•

7.5 Lubrication-Free Chair and Tracks

The chair and tracks are constructed with lubrication-free materials.

Never lubricate the track, the PowerTraxx, or any other part of the

track system or chair.

Applying lubricant can cause damage to the

chair. Lubricants on the belts or track can cause the chair to perform

unpredictably, resulting in injury to the patient and/or operators.

Do Not Lubricate

Содержание Transcend Chair Series













































Результаты поиска

Содержание Transcend Chair Series

Отзывы:

Похожие инструкции для Transcend Chair Series

Бренды по названию

Популярные бренды

Ferno Transcend Chair Series, Руководство пользователя

Результаты поиска

Содержание Transcend Chair Series

Отзывы:

Похожие инструкции для Transcend Chair Series

Бренды по названию

Популярные бренды