Ferno Integrated Patient Transport & Loading System iNX Скачать руководство пользователя страница 5

Страница: 5 / 68

1.3 Tip

Tips provide recommendations for easier use of the product.

1.4 Bloodborne Disease Notice

To reduce the risk of exposure to blood or other potentially

infectious materials when using the iN∫X, follow the

disinfecting and cleaning instructions in this manual.

Safety Information

1.5 Fastening System Compatibility

Combining different manufacturers’ products such as a

Ferno cot with a non-Ferno fastening system can increase

the user’s risk of injury and damage.
Ferno-Washington, Inc. products are designed for use only

with Ferno-manufactured fastening systems. Use of a Ferno

product with a non-Ferno fastening system is misuse of

the Ferno product. The user assumes responsibility for the

outcome of known, intentional misuse.

1.6 Symbol Glossary

The symbols defined below are used on the iN∫X and/or in this users’ manual. Ferno uses symbols recognized by the International

Standards Organization (ISO), American National Standards Institute (ANSI) and the emergency medical services industry.

Scene Lights

DC (Direct Current)

electricity

Laser Class 2M

Warning: Do Not Stare

Into Light

OFF

Locked/Unlocked

Manufacturer

General Warning of

Potential Injury

Extend Legs

Retract Legs

Status Indicator: Low or

Medium Priority

Do Not Open

No User Service

In This Area

Operation Requires

Two Trained

Operators

Chair Position

WEEE Directive:

Dispose of Battery

Properly

Read the

Users’ Manual

Emergency Lights

Lubricate/Do Not Lubricate

European Community

Authorized

Representative

Pinch Point

Keep Fingers Clear

Status Indicator:

High Priority

QR Code

(To Access Online Material,

Scan with Smartphone

or Click this Link in the

Electronic Manual)

Load Capacity

Recycling

Information (USA)

Product Meets European

Union Standards

1.2 Notice

Notices emphasize important, but not hazard-related

information. Failure to follow Notices could result in product

or property damage.

NOTICE

Содержание Integrated Patient Transport & Loading System iNX





































































Результаты поиска

Содержание Integrated Patient Transport & Loading System iNX

Отзывы:

Ferno Integrated Patient Transport & Loading System iNX, Руководство пользователя, Страница: 5 / 68

Результаты поиска

Содержание Integrated Patient Transport & Loading System iNX

Отзывы: