Ferno 175 Series Скачать руководство пользователя страница 1 | Manualshive

Страница: 1 / 13

Ferno 175 Series Скачать руководство пользователя страница 1

© Ferno-Washington, Inc. / 234-3601-00

1

Technical Service Bulletin

Ferno Antler and Rail Fastening System

To Our Valued Ferno Customers:

Ferno Model 175 Series Fastening Systems limit the movement of a Ferno ambulance cot inside the patient compartment of

an ambulance. Regular inspection and preventive maintenance are critical to ensuring proper performance of cot fastening

systems. Failure to maintain the fastening system puts EMS personnel and patients at risk for injury.

This Ferno Model 175 Series Fastening System Technical Service Bulletin addresses inspection, proper placement, and

preventive maintenance of your antler and rail, safety hook, and floor plates, and includes identification of common wear-

and-tear issues.

For additional assistance on Ferno Model 175 Series Cot Fastening System preventive maintenance, please contact Ferno

Technical Support at 1.877.733.0911, or email to

[email protected]

Additional copies of this technical service bulletin are available upon request by calling Ferno at 1.800.733.3766.

1
2
3
...
»

Содержание 175 Series














Отзывы:

Нет отзывов