Ferm LBM1010, Оригинальное руководство пользователя

Страница: 6 / 12

6
EN
d) Under abusive conditions, liquid may be
ejected from the battery; avoid contact.If
contact accidentally occurs, flush with water.
If liquid contacts eyes, additionally seek
medical help
. Liquid ejected from the battery
may cause irritation or burns.
Service:
a) Have your power tool serviced by a
qualified repair person using only identical
replacement parts.
This will ensure that the
safety of the power tool is maintained.
For the charger:
Intended use
Charge only CDA1106 20V max. 2.0 Ah Li-ion
type rechargeable battery packs. Other types of
batteries may burst causing personal injury and
damage.
a)
The appliance is not to be used by persons
(including children) with reduced physical,
sensory or mental capabilities, or lack of
experience and knowledge, unless they have
been given supervision or instruction
b)
Children being supervised not to play with
the appliance
c) Do not recharging non-rechargeable batteries!
d) During charging, batteries must be placed in the
well ventilated area!
Residual risks:
Even when the power tool is used as prescribed it
is not possible to eliminate all residual risk factors.
The following hazards may arise in connection with
the power tool’s construction and design:
a)
Health defects resulting from vibration emission
if the power tool is being used over longer
period of time or not adequately managed and
properly maintained.
b) Injuries and damage to property to due to
broken accessories that are suddenly dashed.
Warning! This power tool produces an
electromagnetic field during operation.
This field may under some circumstances
interfere with active or passive medical
implants. To reduce the risk of serious or
fatal injury, we recommend persons with
medical implants to consult their physician
and the medical implant manufacturer
before operating this power tool.
Electrical safety
When using electric machines always observe the
safety regulations applicable in your country to
reduce the risk of fire, electric shock and personal
injury. Read the following safety instructions and
also the enclosed safety instructions.
Always check that the voltage of the
power supply corresponds to the voltage
on the rating plate label.
Class II machine - Double insulation -
You don’t need any earthed plug.
2. MACHINE INFORMATION
Technical specifications
Battery CDA1106
Charger CDA1107
Input of charger 220-240V~ 50/60Hz 1.2A
Output of charger 21V DC, 2.2A
Battery charging time 60 min
No load speed 13.000 rpm
Max. blower velocity 180 km/h
Max air volume 5 m³/min
Weight (incl. battery) 1.9 kg
Sound pressure level LPA 76.3 dB(A) K=3 dB(A)
Sound power level LWA 84.7 dB(A) K=3 dB(A)
Vibration value 1.370 m/s
2
K=1.5 m/s
2
Vibration level
The vibration emission level stated in this
instruction manual has been measured in
accordance with a standardized test given in
EN60745; it may be used to compare one tool
with another and as a preliminary assessment of
exposure to vibration when using the tool for the
applications mentioned.
• Using the tool for different applications, or with
different or poorly maintained accessories,
may significantly increase the exposure level.
• The times when the tool is switched off or
when it is running but not actually doing the
job, may significantly reduce the exposure
level.
Protect yourself against the effects of vibration by
maintaining the tool and its accessories, keeping
your hands warm, and organizing your work
patterns.