46
Ferm
RANDOM ORBITAL SANDER
FROS-450
SAFETY AND OPERATING
INSTRUCTIONS
For your own safety and for the safety of
others, please read these instructions carefully
before using this appliance. It will help you
understand your product more easily and avoid unneces-
sary risks.
Keep this instruction manual in a safe place for future
use.
TABLE OF CONTENTS:
1. Machine data
2. Safety instructions
3. Assembly
4. Use
5. Service & maintenance
1. MACHINE DATA
CONTENTS OF PACKING
•
Random orbital sander
•
1 Sand paper (grain 80)
•
Dust bag
•
User manual
•
Warranty card
•
Safety instructions
INTRODUCTION
The Random orbital sander FROS-450 is designated
for dry sanding of surfaces of wood, plastic and filler
as well as for painter surfaces.
TECHNICAL SPECIFICATION
FEATURES
Fig. 1
1. On/off switch
2. Handle (behind)
3. Dust bag
4. Ventilating apertures
5. Sandpaper
6. Sanding sole
7. Handle (front)
8. Adjusting wheel
9. Lock-on button for on/off switch
2. SAFETY INSTRUCTIONS
EXPLANATION OF SYMBOLS
In this manual and/or on the machine the following
symbols are used:
In accordance with essential applicable safety
standards of European directives
Class II machine – Double insulation – You
don’t need any earthed plug.
Risk of damaging material and/or physical
injuries
Shows presence of voltage
ELECTRICAL SAFETY
•
Always check that the power supply corresponds
to the voltage on the rating plate.
•
Immediately throw away old cables or plugs when
they have been replaced by new ones. It is dange-
rous to insert the plug of a loose cable in the wall
outlet.
•
Only use an approved extension cable suitable for
the power input of the machine. The minimum
conductor size is 1,5 mm
2
. When using a cable
reel always unwind the reel completely.
SPECIFIC SAFETY INSTRUCTIONS
•
Contact or inhalation of dust coming free during
sanding (e.g. lead painted surfaces, woods and
metals), can endanger the health of operator and
bystanders. Always wear appropriate personal
equipment as a dust mask and use the dust bag
during sanding.
•
Check that the switch is not in the “ON” position
before connecting the machine to the mains volta-
ge.
•
Always keep away the mains lead from moving
parts of the machine.
•
When working with the machine, always hold it
firmly with both hands and provide for a secure
stance.
•
Use safety glasses, especially when sanding above
your head.
3. ASSEMBLY
DUST COLLECTION
Fig. 2
The sander has been carried out with a dust bag (3)
to keep the working surface clean. The dust bag must
be installed on the back side of the machine, on the
opening. It is necessary to empty the dust bag regu-
larly for an efficient use.
Empty it as follows:
•
Turn the dust bag slightly and pull it out of the
machine’s adapter.
•
Empty the dust bag in a suitable place.
Voltage
|
230 V~
Frequency
|
50 Hz
Input power
|
450 W
Tool class
|
II
No load speed
|
9000 - 13000/min
Lpa (Sound pressure level)
|
75.8 dB(A)
Lwa (Sound power level)
|
86.8 dB(A)
Vibration
|
5.51 m/s
2
Weight
|
2.3 kg
Ferm
3
