Ferm COM1007P Скачать руководство пользователя страница 8 | Manualshive

Страница: 8 / 96

background image

8

EN

Max cutting capacity at 90°

- Rectangular

115mm x 125mm

- L shape

135mm x 135mm

- Circular

Ø 125mm

Max cutting capacity at 45°

- Rectangular

110mm x 102mm

- L shape

110mm x 110mm

- Circular

Ø 110mm

* For some countries cutting disk is not included.

Vibration level

The vibration emission level stated in this
instruction manual has been measured in
accordance with a standardised test given in
EN 62841 it may be used to compare one tool
with another and as a preliminary assessment of
exposure to vibration when using the tool for the
applications mentioned
•   using the tool for different applications, or with
  different or poorly maintained accessories,
  may significantly increase the exposure level
•   the times when the tool is switched off or when
  it is running but not actually doing the job, may
  significantly reduce the exposure level

Protect yourself against the effects of vibration by
maintaining the tool and its accessories, keeping
your hands warm, and organizing your work
patterns.

Description

The numbers in the text refer to the diagrams on
pages 2-5.

Fig. A.

1.   Upper safety guard
2.   Movable safety guard
3.   Cutting disk (*not included for all models)
4.   Spark deflector
5.   Workpiece clamp

Fig B.

6.   Handle grip
7a.   On/Off switch
7b   Lock-off button
8.   Carbon brush cover
9.   Spindle lock button
10A.  Depth stop bolt
10B.  Depth stop nut
11.   Transport lock pin
12.   Workpiece rear clamp
13.   Workpiece front clamp

14.   Stopper lever
15.   Workpiece spindle
16.   Disk exchange wrench

Fig C.

3.   Cutting disk
17.   Machine spindle
18.   Big inner washer
19.   Big outer washer
20.   Small washer
21.   Disk bolt

3. OPERATING

Before exchanging blades or adjusting
the machine, first remove the power plug
from the wall socket.

Removing the transport lock
Fig. B

The machine has a transport lock pin (11) which
keeps its position low and makes it easy to
transport the device and store it. The lock button
blocks the up/down movement of the saw. And
must be de-activated before using the saw.
• Remove the transport lock by pushing the

machine down a little. While pushing down,
the transport lock pin (11) can be pulled out
with the other hand.

• After the pin (11) has been pulled out, the

machine is able to move up and down freely.

Activating the transport lock
Fig.B

• Push the machine down to its lowest position.
• Then push the transport lock pin (11) until it

slides in place.

Adding / removing a cutting disk
Fig. A, B, C.

Always remove the mains plug before
changing disks

When changing disks always check
related safety instructions

Removing a cutting disk

• Take the disk wrench (16) from the machine

base

• Removing the disk is easier when the movable

safety guard (2) is moved up.

«
...
6
7
8
9
10
...
»

Содержание COM1007P

































































































Отзывы:

Нет отзывов

Похожие инструкции для COM1007P

Бренд: Makita Страницы: 35

Бренд: Makita Страницы: 6

Бренд: Partner Страницы: 7

Бренд: Mafell Страницы: 97

Бренд: Feider Machines Страницы: 20

Бренд: Carbatec Страницы: 30

Бренд: Asada Страницы: 28

Бренд: Mafell Страницы: 94

Бренд: Kity Страницы: 40

Бренд: Kity Страницы: 84

Бренд: 909 Страницы: 17

Бренд: Buffalo Tools Страницы: 16

Бренд: Westfalia Страницы: 62

Бренд: Echo Страницы: 112

4965 Super Sled

Бренд: Woodhaven Страницы: 8

Бренд: METAWOOD Страницы: 85

Sunjoe PJ3600C-RM

Бренд: SNOWJOE Страницы: 16

Sun Joe 24V-LRPL2-LTE

Бренд: SNOWJOE Страницы: 20

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды