1.1 Type: Ecosun 300U, 600U, 700U, 900U (IP44)
Use:
Flats, offices, schools, hospitals, shops, industry and agricultural premises, etc.
Fixing:
Preferentially, fix the panel in a horizontal position to a ceiling with a fixing frame or suspend it on chains or cables.
The panels can
be installed on flammable materials.
The distance of front and side walls of the panel from flammable objects must be at least 10
cm. Panel dimensions are typified for inserting the panels in cassette lower ceilings.
Installation:
When mounting is carried out by means of a fixing frame, mark fixing points and fasten the frame with dowels to the ceiling or ceiling
construction. Connect the supply lead to the network in accordance with colour marking of conductors. When putting the panel on the
fixing frame, first push the panel partially (approx. 10 mm) on the rear shaped ends of frame girders and then incline the panel to the
ceiling or ceiling construction so that the front catches may be pushed horizontally on the frame girders. When installing the panel on
chains or cables, fix the chains or cables to four catches with
Ř
6 mm holes by means of snap-hooks or similar fixtures.
1.2 Type: Ecosun 300c, 600c (IP20)
Use:
In cassette lower ceilings 600×600, 600×1200 (Thermatex, Rockfon, Armstrong).
Installation:
To a lower ceiling grid of respective dimensions. Connect to the box situated on the rear side of the panel.
1.3 Type: Ecosun 700IKP (IP54), 700IN (IP65), 700IN-2 (Eex e II T3) (750IKP, 750IN, 750IN-2)
Use:
Mainly in industrial and agricultural premises.
Fixing:
To be suspended on chains or cables under the ceiling construction, or fixed with a fixing frame right to the ceiling. Should the ceiling
construction be flammable, keep at least a 5 cm distance of the panel from the ceiling. The distance of flammable objects from the front
and side walls of the panel must be at least 10 cm.
Installation:
Connect chains or cables to four catches with
Ř
6 mm holes. In case the fixing frame is used (which is not a part of the panel), it is
necessary to:
•
Mark fixing points and fix the frame with dowels to the ceiling or ceiling construction;
•
Connect the supply lead to the network in accordance with colour marking of conductors;
•
Push the panel catches in shaped ends of frame girders;
•
Insert a guard of actuating current
≤
30 mA to the 700IN-2 supply lead.
2.1 Warning
•
Ambient temperature (i.e. temperature of air in the room where the radiator is situated) must not exceed 30 °C!
•
Supply lead must be fitted with a disconnecting device and the distance of disconnected contacts must be at least 3 mm at each pole.
•
Damaged supply lead must be replaced by the manufacturer or a serviceman.
•
Use countersunk screws to install fixing frames.
•
Type model number indicates input (300 = 300 W).
•
Use gloves for handling not to pollute the front radiating panel surface.
•
Clean with water and detergent, using a small soft brush.
•
This appliance is not designed to be used by people (including children) whose physical, sensorial or mental disability or lack of experience and knowledge
prevent them from safely operating the appliance, unless they are supervised or were instructed how to use the appliance by a person who is responsible
for their safety. Children should be supervised in order to ensure that they won’t play with the appliance.