Feniex Industries, Inc.
1.800.615.8350 /
feniex.com
4
PATTERNS
Setting Colors
1. Hold the green sync wire to
12V+ positive for 3 seconds.
The light(s) will turn steady
blue.
2. Momentarily tap the green
wire to 12V+ positive to cycle
the colors.
Syncing Flash Patterns
1. Connect the blue sync wire(s) of
the Quad product(s) you would like
to sync.
2. Hold the blue sync wire to 12V-
ground for 3 seconds. The flash
pattern will reset to "single-slow".
3. Momentarily tap the blue wire
to 12V- ground to cycle the flash
patterns.
Alternating Flash Patterns
1. Connect the blue sync wire(s) of
the Fusion S product(s) you would
like to set as leader or follower.
2. Hold the blue sync wire to 12V-
ground for 3 seconds. The light(s)
will turn a steady blue for leaders
and red for followers.
N/A