FENDT New Leader NL4330G4, Руководство оператора

Страница: 13 / 21

1.2 Operate the machine
Procedure
1.
Make sure the operator and the ladder areas
are clean and dry to prevent personal injuries.
2.
Make sure all wheel bolts are torqued to
correct specifications before operation.
3.
Never permit any people on or in the
machine when in operation.
4.
Engage park brake and put drive lever in
neutral before starting engine.
5.
Stop the machine, turn off the engine, and
set the park brake if an accident occurs.
Remove the key and take the key with before
inspecting any damage.
6.
Stop machine immediately if there is an engine, hydraulic system or any failure. Do not turn the key
off until the machine stops and turned off correctly.
7.
The operator must not exceed the recommended speeds, loads, or tire inflation. These
recommendations are on the tires and the tire chart located in the operator manual.
8.
Never get off a moving machine.
GUID-73472174-86BC-4C6D-8419-A538ECDE7947-high.jpg [High]
Fig. 7
9.
When leaving machine unattended, set park
brake, turn off the engine, remove the key
and take the key with.
GUID-CCB62396-F09E-4ED4-B7E4-951AE4379F10-high.jpg [High]
Fig. 8
GUID-D599B6BC-38F2-4F90-9C0B-CBBEA33E77E1 [V5]
1. Safety
Application System 13
609146D1A