manualshive.com logo in svg

Fender Tone Master PRO, Руководство пользователя

Поделиться
Скачать
Fender Tone Master PRO Скачать руководство пользователя страница 38

REAR-PANEL FEATURES

Tone Master PRO’s rear panel is cleanly designed to offer a wealth of features and functionality, including mic/line jacks, effects loops, 

MIDI ports, USB connectivity and more.

REAR-PANEL FEATURES

36

EFFECTS LOOPS

To connect an external effect unit to any of Tone Master PRO’s four rear-panel effects loops, run a cable from the effects loop SEND jack to 

the effect unit input, and run another cable from the effect unit output to the effect loop RETURN jack. 

•

 LOOPS 1/2:

 Mono analog relay-based effects loops—especially useful for external drive and fuzz pedals with low input 

      impedances. Loops 1 and 2 are fixed at the beginning of the signal path.

• LOOPS 3/4:

 Loops 3 and 4 can be placed anywhere in the digital signal path, with three options configurable per preset: Loop 3  

      mono, Loop 4 mono and Loop 3/4 stereo.

OUTPUTS

For rear-panel OUTPUT 1 and OUTPUT 2, use balanced 1/4” or XLR cables to connect to external sound reinforcement and recording 

equipment. Ground lift pushbutton helps alleviate unwanted hum for OUTPUT 1. Note that phantom power must be disabled when connect-

ing an XLR cable to a mixer or other interface. 

INSTRUMENT AND MIC/LINE INPUTS

Instrument input accepts standard 1/4” cable; mic/line input accepts standard 1/4” and XLR cable.

1/8” AUX INPUT

1⁄8” stereo TRS AUX IN jack for connection of laptop, mobile device or other instruments equipped with headphone or line output jacks. Aux 

signal can be routed to any output using the mixer section of Global Settings; aux input volume is controlled by the external source device.

EXPRESSION PEDAL INPUTS

Tone Master PRO has two rear-panel inputs for external expression pedals that provide real-time control of amp and effect parameters. Both 

inputs (EXP 1, EXP 2) are compatible with the Fender Tread-Light

™

 Volume/Expression pedal and similar pedals. A 1/4”  TRS cable is required, 

and the compatible expression pedal potentiometer impedance range is 10k-500k ohms. See Global Settings for EXP control options.

TOE SWITCH INPUT

The rear-panel 1/4”  TOE SWITCH input jack is for connection of an external footswitch or expression pedal toe switch to control on/off 

status of amp and effects blocks. A standard 1/4”  TS instrument cable is required. Tone Master PRO can accommodate latching (default) or 

momentary toe switch operation; see Global Settings for toe switch control options.

1/4“ HEADPHONE OUTPUT

Master volume controls headphone volume by default; alternatively, the mixer includes a headphone volume fader control.

AMP CONTROL OUTPUT

For compatible amplifiers, Tone Master Pro’s rear-panel 1/4” amp control output (AMP CTRL) enables remote control of two external amp 

functions (i.e., channel switching and reverb on/off). A 1/4”  TRS insert cable is required; tip is AMP CTRL 1 and ring is AMP CTRL 2. See 

Global Settings for AMP CTRL options.

Содержание Tone Master PRO















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды