144PRO-2013
FEMATEC creative innovations
User manual
Floppy to USB emulator
Model: 144PRO
Floppy driver with below function needed:
Floppy driver with 34pin interface, and 5V DC power plug (example: SONY YE-DATA
ALPS TEAC EPSON PANASONIC NEC)
Use 2HD flpppy disk with 1.44MB capacity
Format of disk : Cylinders: 80
Tracks: 160 Sectors/Track: 18 Bytes/Sector: 512 Data
transfer rate: 500 kbps Encoding method: MFM.
Features:
Use normal usb flash drive as the medium for transfer design, support FAT16/FAT32 format.
34pin floppy driver interface, 5V DC power supply, easy to install.
Capacity: 1.44MB 2HD Cylinders: 80 Tracks: 160 Sectors/Track: 18 Bytes/Sector: 512 Data
transfer rate: 500 kbps Encoding method: MFM.
1.44MB built-in flash memory, with FAT12 format, used for cache data from usb flash drive.
Within 1.44MB capacity of Files in root directory or 999 folders can be searched.
Long file name and 4-level directory in 999 folders supported.
Jumpers with function for different machines.
100 disk image file supported. (used for machine with non FAT disk format, example for
make boot disk)
Panel:
8segment numbers:
represent folder name
Green led:
status of read and write operation
USB port:
connect usb flash drive
Button:
When no usb flash drive pluged on emulator:
Left button used to rise ten-digit, right botton used to rise single-digit, press 2 button together to
rise hundred-digit, when the hundred-digit is ‘b’, the image mode used.
When an usb flash drive pluged on emulator:
Left button used to transfer data from built-in memory into usb flash drive, right button used to
transfer data from usb flash drive into built-in memory.
+10 +1
Green Led
