Fema Electronica S Series, Руководство пользователя, Страница: 12 / 16

User’s Manual S40-R
FEMA ELECTRÓNICA - Page 12
Relay type 3 contacts (Common, NC, NO)
Maximum current 8A (resistive load)
Voltage 250 Vac continuously
Installable at Option1 and/or Option2
Output 4/20mA, 0/10Vdc selectable
Accuracy 0.1% FS
Isolated yes, 1000Vdc
Thermal drift 50 ppm/ºC for Vdc
60 ppm/ºC for mA
Installable at Option1 and/or Option2
Module with 1 analogue output. Configurable 4/20mA or
0/10Vdc. Output signal proportional to the reading. Scaling
through the frontal keypad. Up to a maximum of two AO
modules can be installed in one S Series panel meter. For
more information see document
2657_S40_OPTIONAL_
MODULES at www.fema.es
Module with 1 relay. Up to a maximum of two R1 modules
can be installed in one S Series panel meter. For more relay
output needs, check special modules R2 and R4. For more
information see document
2657_S40_OPTIONAL_MOD-
ULES at www.fema.es
2. Output and control modules
2.1 Module R1 2.2 Module AO
Opt 2 Opt 1
Terminal A Common
Terminal B NO - Normally Open
Terminal C NC - Normally Closed
Power Signal
A B C A B C
Opt 2 Opt 1
Jumper M mode mA
Jumper V mode Vdc
Terminal A Vexc (+13.8Vdc @25mA)
Terminal B Signal output (mA or Vdc)
Terminal C GND
Power Signal
A B C M V A B C M V