Fema Electronica M60-P, Руководство пользователя

Страница: 14 / 24

FEMA ELECTRÓNICA . Series M . M60-P
14
1.12 To access the instrument
1.13 Modular system
Series M panel meters are designed to create a modular system. This
modular system allows for addition, replacement or substitution of
any of the internal modules conforming the instrument. Below is a
graphic explanation for the position of each module.
To open the housing, use a flat screwdriver to free the fixation clips,
if possible, in the following order : D, C, B and A. Remove the front
cover. Let the inside of the instrument slide out of the housing.
To reinsert the instrument make sure that all modules are correctly
connected to the pins on the display module. Place all the set into
the housing, assuring that the modules correctly fit into the internal
guiding slides of the housing. Once introduced, place again the front
cover in front of the housing, placing first corner ‘X’ and then insert -
ing clips ‘A’, ‘B’, ‘C’ and ‘D’ in this order.
X
A
C
B
D
Front Filter Display Module Optional Control Modules
Input Signal Module
Housing
Power Supply Module
Opt.3
Opt.2
Opt.1
Risk of electric shock. Removing the front cover will
grant access to the internal circuits. Disconnect the in-
put signal to prevent electric shock to the operator. Op-
eration must be performed by qualified personnel only.
Observe precautions for handling ESD (electrostatic dis-
charge) sensitive devices