Fema Electronica B Series, Руководство пользователя, Страница: 15 / 28

FEMA ELECTRÓNICA . SERIES B . Models Bxx-T
15
All display functions are grouped under the ‘ Display ’ menu.
For more information relating the functions listed below see
section
1.13.5.
• at the ‘ Steps ’ (‘ StEP ’) parameter configure the value for
the steps reading changes.
• the ‘
Memory of maximum ’ (‘ MAX ’) and ‘ Memory of
minimum ’ (‘ MIn ’) are access to the memory values. To re -
set the value, select the ‘
rSt
’ entry and press ‘SQ’ (
<
).
1.13.9 Display filters configuration menu
Display Steps
Memory of
maximum
Memory of
minimum
Tools
1.13.10 Tools configuration menu
Key UP
(‘Fast access’)
Memory of
maximum
Memory of
minimum
Setpoint 1
Setpoint 2
Setpoint 3
Inside the ‘ Tools ’ (‘ tooL ’) menu several different functions are
grouped.
At the ‘ Key UP (‘fast access’) ’ (‘ K.uP ’) menu configure which
functions and parameters will be accessible through the ‘fast
access’ menu. Select ‘ on ’ to activate each function. For more
information see section
1.13.6.
• the ‘ Setpoint 1 ’ (‘ ALr1 ’) function allows to visualize and
modify the alarm 1 setpoint through the ‘fast access’ menu.
• the ‘
Setpoint 2
’ (‘
ALr2
’) function allows to visualize and
modify the alarm 2 setpoint through the ‘fast access’ menu.
• the ‘ Setpoint 3 ’ (‘ ALr3 ’) function allows to visualize and
modify the alarm 3 setpoint through the ‘fast access’ menu.
• the ‘ Memory of maximum ’ (‘ MAX ’) or ‘ Memory of mini-
mum ’ (‘ MIn ’) functions allow to visualize the maximum or
minimum reading value stored in memory.
The ‘ On Power Up ’ (‘ on.Pu ’) menu assigns functions to be ap -
plied when the instrument starts after a power loss. For more
information see section
1.13.7.
• at the ‘ Delay ’ (‘ dLAy ’) parameter configure the time the in -
strument will wait before starting normal functionality. Time
between 0 and 200 seconds.
• at the ‘
Alarm 1 ’ (‘ ALr1 ’), Alarm 2 (‘ ALr2 ’) and Alarm 3
(‘ ALr3 ’) select ‘ on ’ for the alarm to be active during the start
up after a power loss.
On power-up
Delay Seconds
Alarm 1
Alarm 2
Alarm 3
Key ‘LE’
Alarm unlock
No function
The ‘LE’ (
3
) key at the front of the instrument can be config -
ured to activate several functions. For more information see
section
1.13.8.
• the ‘ No function ’ (‘ nonE ’) parameter assigns no function.
• the ‘ Alarm unlock ’ (‘ A.Lck ’) parameter assigns the manual
alarm unlocking, when the ‘ Locked alarms ’ (‘ A.Lck ’) is active
(see section 1.13.3) .