INSTALLATION GUIDE - AUSTRALIA
DESIGNER III SHOWER HEAD CHROME GREY DELUXE
D3SHCGDA
WHAT IS IN THE PACK
Wall Flange
D3 Shower Head
Shower Head Stem
Oxijet Water Saving Product
(Optional)
Female Threaded
Ball Joint Fitting
D3 Screw Cap
CLEANING THE SHOWER HEAD
DESIGNER III SHOWER HEAD
1.
2.
Hot Water
Vinegar
1:1
15 - 20 mins
Your Feltonmix shower head is manufactured
from self-cleaning plastic materials but if cleaning
is required use a combination of vinegar and
water and by following the steps below is usually
sufficient.
1.
Remove shower rose from the shower
head stem.
2.
Place shower rose in a mixed solution of
vinegar and hot water for between
15 – 20 min. (Note: the face of the
shower rose cannot be removed for
cleaning purposes.)
If extra cleaning is still required use a soft brush.
