46
Maintenance
Motor and controller
The controller of a motorcycle, one of the most important parts and
components, is a core control device that is used to control the start
and operation of the motorcycle’s motor.
Please follow the rules below
●
Please do not modify the motor on your own, otherwise your motorcy-
cle will be vulnerable to spontaneous combustion or traffic accidents.
●
Please do not ride in deep water, much less ride in water which
exceeds the rear wheel’s central axis.
●
Please check the fastening status of the motor more often. If you find
that the screw is loose, please let maintenance personnel to reinforce
it in time.
Caution
If your vehicle is parked for a long time in rain without protection,
you need to check whether there is any water in the controller and
motor before riding. If water is found in the controller or motor, it is
recommended that you do not use the vehicle for a while until the
water condition disappears.
Check tire pressure
Visually check the tires and measure the tire pressure with the
barometer at least once a month or whenever you feel that the tire
pressure is insufficient.
Always check the tire pressure when the tires are cool. The maxi-
mum tire pressure is shown below:
2-person riding:
Front wheel: 225 kPa
Rear wheel: 280 kPa
Warning
Operating this motorcycle with abnormal tire pressure may result in
serious personal injury or death due to loss of vehicle control.
