6
TROUBLESHOOTING
STORAGE & CLEANING
Problem
Possible cause
Solution
No glowing ‘blue’ Power on LED
Machine not switched on
Switch on machine at right rear side and at wall
socket. Press power standby button
Pouch does not completely seal
the item
Item may be too thick to laminate
.BYJNVNEPDVNFOUUIJDLOFTTFRVBMT1BTT
through laminator a second time
Pouch is lost in the machine
1PVDIJTKBNNFE
Machine will automatically reverse the document.
*GKBNJTOPUDPNQMFUFMZDMFBSFE3FWFSTFCVUUPO
XJMMCMJOLnBTI1SFTTBOEIPMESFWFSTFCVUUPO
while pulling on pouch to completely remove
pouch.
Pouch was inserted open end first
Pouch was not centered on entry
Pouch was not straight upon entry
Empty pouch was used
Damaged rollers or adhesive on rollers
Pouch is damaged after lamination Damaged rollers or adhesive on rollers
Pass cleaning sheets through the machine to test
and clean rollers
Turning off the Machine – If the top power button is pushed, the machine will go into cool-down mode. The heaters will turn off, but
the rollers will still run until the unit reaches the desired temperature to turn off completely. This functionality reduces long term wear
BOEUFBSUPUIFVOJU6OQMVHUIFNBDIJOFBUUIFXBMM5IFPVUTJEFPGUIFNBDIJOFDBOCFDMFBOFEXJUIBEBNQDMPUI%POPUVTFTPMWFOUT
or flammable materials to polish the machine. Cleaning sheets can be purchased for use with the machine. When the machine is warm
– run the sheets through the machine to clean any residue off the rollers. For optimum performance, it is recommended that cleaning
TIFFUTBSFVTFEXJUIUIFNBDIJOFSFHVMBSMZ $MFBOJOHTIFFUPSEFSDPEF
NEED HELP?
L
FUPVSFYQFSUTIFMQZPVXJUIBTPMVUJPO
Customer Service...
www.fellowes.com
Always call Fellowes before contacting your place of purchase, see the rear cover for contact details.
$POTJEFSSFHJTUFSJOHZPVSNBDIJOFBUXXXGFMMPXFTDPNSFHJTUFSUPSFDFJWFVQEBUFTBOEBEEJUJPOBMJOGPSNBUJPO
