Page 6
Kata
™
slider mount
retrofit procedure
VESA plate screw
VESA
plate
monitor
(face down)
top
3.9"
(100mm)
3"
(75mm)
step 7: only if not reattaching original monitor: attach VESA plate to new monitor
Skip this step if you are using the original monitor.
• Place the monitor face down on a flat surface. Align the VESA plate holes with the holes on the back of
the monitor. Attach the VESA plate using the four VESA plate screws provided.
— There are two sets of four holes on the VESA plate. One set has holes 3.9” (100mm) apart, the other
set has holes 3” (75mm) apart. Use the set that matches the holes on the rear of the monitor.
step 8: attach monitor to VESA mount
• Slide the VESA plate and monitor onto the
VESA mount.
— Make sure the VESA plate clicks securely
in place.
• OPTIONAL:
Secure the VESA plate to
the VESA mount using the M4x15 VESA
locking screw, as shown below.
VESA
mount
VESA
plate
2mm Allen key
VESA locking screw
M4x15
