Page 6
Step #6: install stubby monitor arm assembly
• Remove the locking ring from the second connection sleeve and install the sleeve about one-third down from the top of the post. Tighten the screw securely.
• Install the monitor arm onto the connection sleeve by sliding its tabs into the center two slots on the sleeve.
• Slide the decorative covers into the four unused slots on the connection sleeve.
• Lock the monitor arm to the connection sleeve with the locking ring. Rotate the locking ring clockwise to secure it.
If necessary, the height of the connection sleeves may be adjusted after the monitors have been installed.
CAUTION:
Be sure to have an assistant
support the weight of the monitors and monitor arms before loosening the the screw on the connection sleeve.
KataEX3-FMS
Assembly
4mm
Allen key
remove
locking ring
stubby monitor
arm assembly
install
decorative
covers
install
locking
ring
