Page 6
Step #1: remove clamp from bottom bracket
• Unscrew the two M5x8 socket cap screws using the M4 Allen key.
— Remove the clamp from the bottom bracket.
Step #3: attach bracket assembly to power module
• Route the power cord through the opening in the top bracket.
• Attach the top bracket to the rear of the power module
using the two M3x12 panhead screws. Hand-tighten
securely.
power module
bottom
bracket
2"
top
bracket
M3x12
Step #2: attach M5x8 screws to bottom bracket
• Install the two M5x8 screws back onto the bottom bracket, leaving about 1/8" exposed between the
screw heads and the bracket.
— With worksurface thicknesses between
0.9" and 2", attach the screws to the lower
two holes.
— With worksurface thicknesses less than 0.9",
attach the screws to the upper two holes.
lower
upper
0.9" to 2"
0.4" to 0.9"
1
/
8
"
clamp
bottom
bracket
M5x8
socket cap
screw
FlexCharge4CX Grommet mount
