F-960 Instruction Manual rev. 6/23/2017
1554 NE 3
rd
Ave, Camas, WA 98607, USA
38
Phone: (360) 833-8835
[email protected]
www.felixinstruments.com
pressing and holding the power button for 10 seconds. You’re
done!
Maintenance of your F-960 Ripen It! Gas
Analyzer
Long Term Storage of the F-960
WARNING:
If you plan to store this device for longer than
one month, follow the instructions below on how to
disconnect the O
2
and C
2
H
4
sensors from the board. This
will prolong the life of the O
2
and C
2
H
4
sensors.
1.
Turn off the F-960 Ripen It! And remove the
bottom rubber mat.
2.
Remove the battery cap (it’s spring loaded!) and
unscrew the black bottom plate of the F-960.
