FELIX
Pro Series
Page
1
1
Safety
General safety
-
Keep children under the age of 14 out of reach of the printer
-
FELIXprinters are only suitable for professional use.
Considerations when in operation.
-
Don’t leave the printer unattended, before making sure the
first layer is printed properly
-
Don’t lean on the printer.
-
Be careful with long hair and wide clothes.
-
Don’t transport the printer.
-
Make sure all moving parts can move without any obstructions.
-
Don’t remove any objects from the hot plate while printing.
-
Caution with any moving parts that move in the X, Y and Z
direction. Moving parts can have a pinching hazard.
Electronic safety
-
Only use the power supplies and cables supplied by FELIXprinters.
Always turn off and unplug the printer before performing
maintenance or modifications.
-
The power supply meets all CE mark regulations and is protected
against short-circuit, overload, over voltage and over
temperature.
Printer placement
-
Place the FELIXprinter on a stable surface.
-
Place the printer out of reach of children. Use the FELIXprinter in a
dry environment at room temperature.
Ventilate
-
Good ventilation while printing is advised. When printing ABS,
small concentrations of styrene vapor can be released. This can
(in some cases) cause headaches, fatigue, dizziness, confusion,
drowsiness, malaise, difficulty in concentrating, and a feeling of
intoxication.
-
We recommend using filament types shown on the
FELIXprinters website. Examples PLA, PETG, ABS-X, Glassbend
etc. Other types may be toxic; please follow instructions from
the filament supplier
.
Caution with heater elements
-
There is a potential risk of burn, as the print head can reach
temperatures of up to 275°C and the heated bed of up to 120°C.
-
Don’t place objects on the heated bed, not even when the
printer is turned off.
-
Always let the printer cool down for at least 5 minutes before
doing maintenance or modifications
.
-
Never try to print without a buildplate in the machine, this can
cause damage to the machine and heated bed.
