F-751 Avocado Operation Manual Rev. 1/25/2023
Page
|
17
Felix Instruments
1554 NE 3rd Ave
Camas, WA 98607, USA
Phone: +1 (360) 833-8835
Fax: +1 (360) 833-1914
www.felixinstruments.com
[email protected]
Taking Measurements
BIN001 Fruit 1
Fruit 1 of 10
32.8
Side A
31.5 DM
34.0 DM
Side B
32.8
DM
DM
Figure 19
. Measurement Screen w/ Scans
Position an avocado horizontally
over the lens of the instrument,
with the dorsal/ventral side of the
equator of the fruit centered over
the lens. Then press the
Measure
button to take a measurement. If a
bin has not yet been created, the
device will automatically create an
Ad Hoc bin with the prefix “AH00
1
”.
By
default, the
device
will
automatically
perform
three
successive scans for each side.
This process takes a few
moments. The display will
show
Wait
while measuring
the fruit.
Average Dry Matter value
for the currently
selected/measured fruit.
Name and number of the
currently selected/
measured fruit.
Once the measurement has
completed, the device will
make an audible beep and
the screen will display the
measurement results.
Name and number of the current bin.
Average Dry Matter value for the current bin.
a.
Number of fruit with completed
measurements out of the total number of
fruit in bin.
b.
Bin progress bar (will gradually fill as more
fruit have completed measurements).
