Felder AD 941, Руководство по эксплуатации

Страница: 17 / 72

17
90 / 84*) 94 / 85*) 99 / 91*) 97 / 92*)
83 / 74*) 86 / 73*) 88 / 83*) 91 / 82*)
97 / 83*) 94 / 83*) 101 / 91*) 97 / 91*)
82 / 69*) 79 / 71*) 87 /79*) 83 /76*)
81 / 69*) 85 / 72*) 84 / 78*) 88 / 77*)
Planer-Thicknesser
A 941 / AD 941 / AD 951
Idle Working
Surface planing width in mm --> 410 510 410 510
Sound power level - L
WA
(EN ISO 3746)
Workplace emissions values - L
pA
(EN ISO 11202)
*) = Reduced noise emission with the Silent-POWER® cutterblock
Idle Working
Thicknessing planing width in mm --> 410 510 410 510
Sound power level - L
WA
(EN ISO 3746)
Workplace emissions values - L
pA
(EN ISO 11202)
Working position 1 (feeder-side)
Working position 2 (receiver-side)
*) = Reduced noise emission with the Silent-POWER® cutterblock
Technical data
4.7 Noise emission
The specified values are emission values and therefore
do not represent safe workplace values. Even though a
relationship exists between particle emission and noise
emission levels, an inference cannot be made about
whether additional safety measures need to be imple-
mented. Factors which can significantly affect the emis-
sion level that presently exists at the workplace include
duration of the effect, characteristics of the workspace,
and other ambient influences. The permissible workplace
values may also differ from country to country. Neverthe-
less, this information is provided to help the operator bet-
ter assess hazards and risks. Depending on the location
of the machine and other specific conditions, the actual
noise emission values may deviate significantly from the
specified values.
Note:
In order to keep noise emission to a minimum, be sure to always use sharpened planer knives.
Hearing protection must be worn, it is however, not a substitute for correctly sharpened planer knives.
Note:
All values in dB(A) and with a measurement uncertainty factor of 4 dB(A).
The measurement results are in accordence to:
ISO 7960:1995, Annex B (Surface planing)
ISO 7960:1995, Annex C (Thickness planing)
Acoustic power level according to EN ISO 3746
Emission values at the workplace according to EN ISO 11202
Measurement conditions / Additional data: EN 19085-1, Chapter 7.2.2