FAQ • VIMBLE 2A
SET-UP & OPERATION
1) Is it recommended to manually rotate the tilt axis quickly?
Please do not rotate the tilt axis quickly as it will damage the gimbal.
2) How do I return to normal filming mode from selfie mode?
Firstly, keep the gimbal vertical. Secondly, double tap the trigger button to go
back to normal position.
3) How do I control the camera using the gimbal’s buttons?
Single press the shutter button to take a photo or start/stop recording a video
(when the GoPro is in video mode).
Press and hold the shutter button for 3 seconds to switch between photo and
video mode.
4) How do I update the firmware for Vimble 2A?
The Vimble 2A can be updated via the Feiyu ON App. Gimbal firmware, keypad
board firmware and Bluetooth firmware can all be updated via the app.
After successfully updating, you need to hold the power button for around 10
seconds to boot it up.
5) How do I turn on the Wi-Fi of the GoPro?
Slide down the touch screen of the GoPro, select “preference”.
Select “wireless connection”.
Select “Connect to GoPro APP”.
Now the Wi-Fi is on and could be detected by other devices. Click the “i” button
to see SSID and Password.
6) How do I establish a Wi-Fi connection between the camera and the gimbal?
You can establish the connection through the
Feiyu ON APP as per the following steps:
1
Reset the Wi-Fi settings: trigger
shutter joystick
(pushing down)
2
Turn on the Bluetooth on your phone
and open the Feiyu ON APP.
