- 4 -
3.3 Mount camera on gimbal
Unlock the quick release plate safety lock
①
, install the plate with the mounted
camera into the slot
②
in direction of icon, lock the safety lock
①
once the camera is
roughly balanced. It is recommended to push the camera against the tilt axis. Unlock
the slider lock
③
to move the camera left or right according to camera's width, then
lock the slider lock
③
.
1
!
2
3
3
4. Gimbal Balancing
Please balance the gimbal before shooting. Take camera
mounting as an example. Make sure the camera and lens are
ready for shooting, and the gimbal is powered off or in sleep
mode before balancing.
It is recommended to hold up the
camera first, then move the slide arm, cross arm and
vertical arm.
Tutorial Videos
Содержание SCORP Mini
Страница 1: ...Instructions V 1 0 Tutorial Videos...